Anritsu MG362XXX Series Instrument Driver Readme
1. Summary Overview
Instrument Driver Technology: LabVIEW Plug and Play (project-style)
Manufacturer: Anritsu
Supported Language(s): LabVIEW
Supported Model(s) via SCPI: MG362XXA
Model(s) Tested for SCPI: MG362XXA
Primary Interface(s): SCPI
Firmware Revision(s) Tested: V2022.3.2, V2022.5.1 (MG362XXA)

Certified: No
NI Supported: No
Source Code Available: Yes

Driver Revision: 1.0
Original Release Date: 12/10/2021
Current Revision Date: 8/23/2022
 

2. Required Software
Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below.

VISA 14.0 or later

Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.


3. Known Issues



4. Revision History
1.0 Initial revision

1.1 Many changes due to more complete test coverage.
Fixed list sweep frequency list update from resending power list. 
Fixed list sweep power list update from resending frequency list.
Remove Fast Frequency Switching vi. Use List Sweep instead.
Changed Perform Master Reset.vi to Perform Reset All.vi. Changed to not send any commands or queries after Reset All is performed because Reset All will reboot the instrument.
Fixed the Initialize.vi Reset parameter false path doing a reset.
Removed invalid status queries from Default Instrument Setup.vi.
Fixed a *ESR? timeout in Initialize.vi Reset true path for a GPIB interface.
Removed setting VISA attribute VI_ATTR_SUPPRESS_END_EN in Initialize.vi. Not all interfaces support this attribute, leaving it at default.
Changed Error Query.vi to use correct commands. 
Updated ALC Mode (External Leveling).vi.
Removed external leveling control from Configure Power Level Entry.vi
Removed external level control from Configure Power Level List.vi.
Added power sweep range selection to Configure Power Level Sweep.vi. Changed steps to points.
Remove PCV and PCT unit labels from AM parameters.
Changed Configure Status Mask register input label. Changed to single U16 input for the mask.
Fixed Read Instrument Setup.vi and Write Instrument Setup.vi context help.
Limited FM mode choices for MG362x1A instruments.

